Home  |   |   |  Allparts Jaguar® Neck
CLR-JGRO1
CLR-JGRO1
Email To A Friend   |   Print Page

Allparts Jaguar® Neck

$143.00
List Price $220.00
You Save $77.00
Availability: In Stock
Allparts Jaguar® Neck
SKU: CLR-JGRO1
We made a mistake drilling out 2 tuner holes. These holes will need to be plugged and re-drilled. See additional photos. Price reduced $25.

Replacement Neck for Fender Jaguar® With Rosewood Fingerboard, 22 vintage frets, 7.25" Radius, 1-5/8" nut width.
Jaguar® is a registered trademark of Fender® Musical Instruments Corp. These necks are licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.

  • 24"” scale
  • 22 vintage frets
  • Maple neck, sanded, unfinished and ready to spray
  • Rosewood fingerboard
  • 7.25” radius
  • 1-5/8" nut width
  • 2-3/16" heel width
  • 0.340" Tuning peg hole diameter
  • Truss Rod adjustment at heel
  • Neck thickness .85” at first fret, .95” at twelfth fret
  • In Stock
  • Wood Type:Hard Rock Maple
  • Finish:Sanded, unfinished and ready to spray
  • Fingerboard:Rosewood
  • Scale Length:24
  • Fretboard Radius:7-1/4"
  • Frets:22 Medium Jumbo
  • Inlays:Dots
  • Side Markers:Dots
  • Tuner Holes:Vintage 11/32" (8.73mm)
  • Truss Rod:Adjusting nut at the heel
  • Nut:Not Installed
  • Neck Style:Bolt On
  • Width at Nut:1-5/8"
  • Thickness at first fret.85"
  • Thickness at twelth fret.95"
  • Width at heel2 3/16"