Home  |   |   |   |  Baritone Replacement Neck for Stratocaster®
FENDER® LICENSED BARITONE NECK FOR STRAT ROSEWOOD WD6SR
FENDER® LICENSED BARITONE NECK FOR STRAT ROSEWOOD WD6SR
Email To A Friend   |   Print Page

Baritone Replacement Neck for Stratocaster®

$228.00
List Price $315.00
You Save $87.00
Availability: Ships in 7 days
Baritone Replacement Neck for Stratocaster®
SKU: SR-BAR


This Fender® Licensed Baritone conversion neck with 27.78in. scale length, these necks will convert any standard Strat® into a baritone guitar with a low end punch that you just have to experience to believe. The necks are unfinished, sanded and ready for spray. No modifications to your guitar are necessary. All you have to do is change the strings to a baritone set after you set up the neck. Nut not included.
  • Ships in 7 days
  • Wood Type:Hard Rock Maple
  • Finish:Unfinished
  • Fingerboard:Rosewood
  • Scale Length:27.78
  • Fretboard Radius:12"
  • Frets:24
  • Inlays:Dots
  • Side Markers:Dots
  • Tuner Holes:Vintage 11/32" (8.73mm)
  • Truss Rod:Adjusting nut at the heel
  • Nut:Not Installed
  • Neck Style:Bolt On
  • Width at Nut:1-5/8"
  • Thickness at first fret.085
  • Thickness at twelth fret.092
  • Width at heel2-3/16"